Screen printing, or silk testing, is an old time procedure to print on almost any type of product. With brand new equipment it is also possible to print on cylinders which, with typical screen printing methods, would certainly be impossible. The original silk made use of for a screen has been replaced today with a nylon product that has a very, really limited mesh. It does still have the feeling as well as appearance of silk. The display material is extended over a frame, usually made of wood. It is a great deal like a display home window that you would have in your residence, although the screen mesh is much tighter, implying the weave is a lot closer together. The display is covered on both sides with an item called “emulsion”. Solution is an image delicate product that will layer the nylon mesh. When it is subjected to light the solution hardens as well as bonds with the screen mesh. Nothing occurs to the solution where light is blocked from reaching it as well as it is later on gotten rid of.
The process entails three basic steps. One is to prepare your art work, photo or message and get that made into an item of movie. This movie is clear with the art work or message being black. Second is to lay this movie on top of your display as well as subject it to a light for a pre determined amount of time. Third you will lay your display into the material to be printed on and also drag ink over it with a squeegee. Let’s claim we wish to print the letters “ABC”. We would certainly begin by developing an item of film that would certainly have the three letters on it, most likely right in the facility. The three letters would be black on this piece of movie et cetera would certainly be transparent. This item of movie is laid level onto the display and also a piece of glass is laid over it to maintain everything from relocating. When we subject this to light the clear areas on the movie will solidify the solution and also make it long term on the display. After the exposure the screen is cleaned with running water and also the components of the emulsion that were not exposed to light will get rid of. In this circumstance we will certainly have our letters “ABC” on our screen printing where ink will certainly go through and also print to whatever product is below it since the unexposed emulsion will certainly get rid of.
If we wanted to publish each of the letters in a different shade, let’s claim red, white and blue, we would certainly need a different screen for every of the 3 letters, yet we would need to have each letter in the correct setting to make sure that they really did not print on top of each various other or out of placement. The simplest way to do that with our “ABC” scenario is to set up the three different screens and after that obstruct the “B” and the “C” with paper or a tape and do the direct exposure of simply the “A”. We will call this our red screen. We will obstruct the “A” and the “C” off our next display as well as call that our white display. Currently we will obstruct the “A” and also “B” and also call this our blue screen. Currently we have 3 different screens, each in a different structure and also each with part of our “ABC” photo. We could make three different pieces of movie as well, each one with simply one letter, yet that takes extra materials. When printing this “ABC” image we will print the “A” display, then the “B” screen and also finally the “C” display to come up with our 3 color image. Care should be required to register your structure in the precise very same spot each time so that all text and photos on the screen appear in the right spots on the completed product.